Our wholesale company is Williams Trading.
If you want to see anything new or different that we handle , go see our What's New page ,  click here ........


Accumix containers are again in stock !!!  
Also new are carbon/teflon crank seals for the KT100S and KT100J at just $7.50 RRP.  

          AccuMix fuel jugs               Carbon/teflon crank seals

Workshop News..........
A new Ultrasonic Parts cleaner  ......... 
This is just something to see,  any carb or crankcase can be cleaned in 20 minutes to look like brand new again  !!  We are still experimenting with cleaning agents and so on,  but results to date have been amazing.  Any carb left with us to be rebuilt will be cleaned 'for free' in January.  Even old carbs that have corroded due to the use of methanol and other exotic fuels can be cleaned up to look amazingly like new.

We now have our own ignition testing rig. 
At this time it is only setup to handle Yamaha KT100S and KT100J ignitions, ( which covers the ARC also ),  so if you have one that needs testing,  or you want accurate timing marks engraved on yours,  then we can help you.   Cost is just $30 RRP.

Walbro carburetor tuning and modifications. 
In 2006 we spent many hours out testing with our junior drivers in the National classes.  By the end of 2006 we were able to produce a better performing WB-3A carburetor with revised drillings and o'ringed throttle shaft.
A new carburetor with these mods done is  $210 RRP,  or we can do all this to a used carb  including a full rebuild for just $70 RRP. 

NEWS FLASH  ...  2007 SA closed titles - JNL won by Rhys Newman using our specially modded Walbro carb.   
                             2007 City of Adelaide titles - JNL won by Rhys Newman using  ...  you guessed it  !!
                            2007 Midget/Rookie Challenge  - JNL won by Rhys Newman using  ...  you guessed it,  again !!
           And just to show some variety by both the driver and Ian Williams Tuning's preparation skills .......        
  2007  SA Youth Superkart Championship won by Rhys Newman using an IWT prepared Rotax Junior Max. 

                

We now have our full pricelist available on a CD.  Included are also pictures of many of our products , exploded parts drawings and installation and operating instructions.   We are including them with any orders shipped,  or you can simply request one to be posted out.  .... email request now - dealers only please !!! ... 

Since 1985 we have been supplying a wide range of kart and engine accessories to the trade. We are specialists in the field of fast supply , and can source all the parts that shops need.   Our trade prices are some of the cheapest in Australia.

Our brands of imported , locally sourced or locally manufactured items include

Mikuni motorcycle carburetors and parts.
Yamaha kart engines and parts
Gaskets in a range of sizes to suit KT100S & J and Rotax Max
Strike pistons to suit Yamaha KT100S & J engines
Walbro carburetors
PITPARTS accessories - many of the small items that are needed every day for karting
NGK spark plugs
Uni airfilters
K & N airfilters
Accu Mix 2 stroke fuel mixing containers
#219 chains - DID
Alloy and plastic kart sprockets in #219 and #35 pitch
Airboxes
Digatron instruments and dataloggers - including the DT-47 fuel tester
Edwards kart wheels and hubs, sprocket and disc carriers and engine mounts
Burris 34mm carburetors
Tillotson carburetors
Easitune tuning lights
Alloy karting components, washers, tie-rods, pedal grips etc
Stick-on numbers and signs.  We can produce specials as well as product signs etc.
Tools -  some general type and some specialist karting ones
SSS clutch to suit KT100 Yamaha - both 100S and 100J now available  --  and electric starters to suit.